Insta360 Motorcycle Kit

1. Follow these instructions to use the Flexible Adhesive Mount: 

a. Clean the base with a cleaning wipe before use. Ensure the surface is clean, dry and smooth.

b. If the sticky base detaches from the surface, it cannot be reused.

c. To ensure a strong hold, press and hold the product for 30 seconds after sticking to a surface.

d. Wait at least 24 hours after sticking to use it with a product.

e. If the 3-prong adapter becomes worn, apply the anti-slip ring for more security.

f. This product cannot be used with any selfie sticks.

2. The Heavy Duty Clamp is for mounting to round tubes such as handlebars or bumpers, with a diameter range of 17 to 37mm(0.6–1.5in). Do not attach to irregularly shaped objects as there is a risk of detachment.

3. When attaching the Heavy Duty Clamp Mount to a smooth metal tube, it is recommended to use the included wrench to tighten it.

4. When installing a selfie stick on the Heavy Duty Clamp Mount, only the official Insta360 Action Invisible Selfie Stick may be used, extended to ≤100cm.

5. Only connect the selfie stick using the 1/4" screw on the Heavy Duty Clamp Mount. Do not install other accessories and then add the selfie stick.

6. If mounting the camera directly to the Heavy Duty Clamp Mount, maximum speed should not exceed 80km/h on smooth roads, or 40km/h when going off-road. Only mount the selfie stick on the motorcycle when riding on smooth roads and ensure the mount is tightened with the included wrench before use.

7. Install the Flexible Adhesive Mount and Heavy Duty Clamp Mount according to the instructions in the manual. Insta360 will not be responsible for any damage or loss that occurs if setup does not match the instructions in the manual.

8. When fixing the selfie stick with the zip tie, do not let the selfie stick have any other contact with the motorcycle except for the fixed position of the bottom cover and the zip tie. Prevent the selfie stick from breaking due to vibration transmission.